2024 Aluminum alloy was squeezed cast by the Gas Induced Semi Solid (GISS) process. Effect of artificial aging on microstructure and mechanical properties of this alloy was studied in the present work. The solutionized specimens were aged hardened at temperatures of 175°C, 200°C, and 225°C under various time durations. The highest hardness of about 77.7 HRE was attained from specimen aged at th...

Purpose: In this work, fatigue crack propagation life of 7020 T7 and 2024 T3 aluminum alloys under the influence of load ratio was predicted by using artificial neural network (ANN). Design/methodology/approach: Numerous phenomenological models have been proposed for predicting fatigue life of the components under the influence of load ratio to take into account the mean load effect. Findings: ...

Abstract: The supersolidus liquid phase sintering characteristics of commercial 2024 pre-alloyed powder was studied at different sintering conditions. Pre-alloyed 2024 aluminum alloy powder was produced via air atomizing process with particle size of less than 100 µm. The solidus and liquidus temperatures of the produced alloy were determined using differential thermal analysis (DTA). The sinte...

In this paper we utilize Support Vector Machines to predict the degradation of the mechanical properties, due to surface corrosion, of the Al 2024-T3 aluminum alloy used in the aircraft industry. Precorroded surfaces from Al 2024-T3 tensile specimens for various exposure times to EXCO solution were scanned and analyzed using image processing techniques. The generated pitting morphology and indi...

The objectives in this study were to deterrnine the through-thickness elastic constant of fiber-epoxy/metal composites with ultrasonic measurements and determine the elastic constants of the constituent layers. The specimens that we studied consist of alternaring layers of aluminum (2024 TI) and fiber-epoxy [1], all of which are 200 to 300 jlm thick. As Figure 1 indicates the outer two layers o...

The inhibition mechanism of sodium oleate (C17H33COONa) for pitting corrosion of aluminum alloy (AA) 2024 in 0.1 mol L NaCl solution was investigated using potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), scanning electron microscopy with energy dispersive spectrometer (SEM-EDS) and X-ray photoelectron spectroscopy (XPS). C17H33COONa showed good inhibition effect on u...

Values of release wave speed in shock-compressed polycrystalline alumina and aluminum (2024) have been measured to 400 and 260 kbar, respectively. These values, as well as previous data for aluminum and iron, have been compared with fourth-order finite strain extrapolations of the longitudinal sound speed V o. For alumina in the pressure range 200-300 kbar and for a iron and • iron the observed...

as an alternative to chromate conversion coatings, rare-earth coatings especially cerium, because of the low toxicity, have attracted considerable attention. using dip immersion method, cerium-based conversion coating was deposited on aluminum 2024. corrosion resistance was studied in 3.5 wt.% nacl solution using potentiodynamic polarization, electrochemical impedance spectroscopy, and surface ...

The viscoelastic response of commercial aluminum alloys 7075-T6 and 2024-T3 as a function of temperature is presented. Experimental data are obtained with a dynamic-mechanical analyzer (DMA) at different loading frequencies and compared with the available transmission electron microscopy (TEM) and differential scanning calorimetry (DSC) data. The effect of successive microstructural transformat...

This study is a follow-up of previous work by the authors on the effects of processing variables on the deformation and fracture of 2024-T4 aluminum. In the previous work, four variables were incorporated into a Design of Experiments methodology: solution temperature, solution time, cooling rate and natural aging time. Solution time and cooling rate were found to be the most significant factors...